The RVR "HFI-16H" Fabric Preparation Machine is intended for reversing knitted fabrics in a tubular form prior to dyeing and raising. It is a fully electronic machine with inverter control. The machine is managed by a PLC and controlled by an HMI (Touching Screen).
The process begins by stepping on the paddle, after which the blower is activated. Manually place the fabric on the pipe's outer surface; the roll begins to open, and the fabric collects on the pipe. Five to six rolls accumulate on the pipe, and the flow of air sucks the entire fabric in and reverses it by stepping the paddle with the other foot and manually inserting the fabric end on the mouth of the pipe.
The machine is ergonomically designed and built.
A 10" inch HMI Panel is included as the interactive control system
PLC control systems are used for synchronised purposes.
The relaxing function in the Plaiting options is used to relieve fabric tension.
Emergency Stop facility is provided as per Safety Norms.
PLC Drive Controlled
72 Inch 96 Inch 110 Inch
1000 x 2400 x 1800 1000 x 2900 x 1800 1000 x 3200 x 1800
220 V / 50-60 Hz , Single Phase AC Supply
0-80 yard / min
AC Drive: 1 Hp - 1 No; 0.5 Hp - 1 No
1 Hp (0.75 Kw - 4 Pole) - 1 No
0.5 Hp (0.37 Kw - 4 Pole) - 1 No