RVR’s “HFI-W-5H” Grey Fabric inspection machine is capable of inspecting fabric in a roll form. The machine can inspect both sides of the tubular fabric in a single pass. It is a fully electronic machine with inverter controlled. It has a wide viewing area to check fabric thoroughly. For tension-free fabric feeding, the automatic fabric feeder and dancing bar are controlled by sensors via a PLC drive.
Scroll Roller is used to remove curled edges from the fabric ends.
For effective inspection, forward and reverse motion is provided.
All rollers are synchronised with the invertor
A measuring Device (MD) is used to displays the length of the fabric inspector.
Defect Counter (DC) is used to determines the number of defects in the fabric.
Emergency Stop facility is provided as per Safety Norms.
Double Side Inspection
Inspection Light Setup
Top & Bottom Illumination
Detects Weaving Defects
Detects Colour Shade Defects
60 Inch 96 Inch
1900 x 1500 x 2200 2400 x 1500 x 2200
220 V / 50-60 Hz , Single Phase AC Supply
0-80 yard / min
AC Drive: 1 Hp - 2 No; 0.5 Hp - 2 No
1 Hp (0.75 Kw - 4 Pole) - 2 No
0.5 Hp (0.37 Kw - 4 Pole) - 2 No